Engine Oil pressure test
2002-2003 Traxter ATV
NOTE: The engine pressure test should be done with a warm engine and with the recommended oil at the proper level.
Remove the oil pressure switch under oil filter and install the oil pressure gauge (P/N 529 035 709) with the adapter (P/N 529 035 652).
1. Oil pressure gauge
2. Adapter
3. Oil filter
The engine oil pressure should be between 101 kPa (14.7 PSI) and 608 kPa (88 PSI) at the idle.
When the hydraulic shifter is used, the engine oil pressure must increase up to about 810 kPa (118 PSI) at 3500 RPM.
NOTE: Since gear change happen very quickly, making the 1 to 5 LEDS flashing by upshifting and downshifting many times rapidly will make the pressure go high for long enough so it can be read.
If the engine oil pressure is out of specifications, refer to TROUBLESHOOTING section.
NOTE:NOTE: Use also annexes 1 and 2 at the end of manual to diagnose.
Updated on: Saturday, November 28, 2020