Engine Oil Change
4-Stroke MFS 2/2.5/3.5A Outboard Motors
Oil Specification
Engine Oil:
4 Stroke Engine Oil
API : SF, SG, SH
SAE : 10W-30, 10W-40
NMMA : FC-W Certified 10W-30
Quantity of Engine Oil:
300cm3(10 fl.oz)
4 Stroke Engine Oil
API : SF, SG, SH
SAE : 10W-30, 10W-40
NMMA : FC-W Certified 10W-30
Quantity of Engine Oil:
300cm3(10 fl.oz)
Use oil with viscosity that is suited to ambient air temperature of the operating region.
Engine Oil Replacement Procedure
Use of engine oil containing dirt or water can significantly shorten the lives of rotating and sliding parts of engine.
Replacement of Engine Oil:
- Stop the engine and set outboard motor straight ahead and vertical.
- Remove top cowl and then oil filler cap "1".
- Place drain oil pan below drain bolt "2".
- Remove drain bolt "2" to drain oil.
- Tighten drain bolt "2" to specified torque.
Apply oil to washer "3" of drain bolt "2".
Drain Bolt:
18N/m (13 lb/ft) [1.8kgf/m] - Pour new engine oil into oil inlet "3" until oil level reaches upper limit mark (center) of oil level gauge "4".
Quantity of Engine Oil:
300cm3(10 fl.oz) - Attach oil filler cap 1, start engine and idle for 5 minutes to warm up.
- Stop engine and check oil level and for oil leaks after 5 minutes.
Updated on: Saturday, December 26, 2020